Standing Seam Metal Roof Systems

When you’re design requires a roofing system that is both aesthetically pleasing and structurally sound, choose one of our six standing seam metal roof systems. An SSR system from MRS is one of the most durable and weather tight roof systems available in the industry.

The BattenLok® HS, and SuperLok® standing seam metal roof systems blend the aesthetics of an architectural panel with the strength of the structural panel. These panels have earned several UL uplift ratings, assuring the reliability of performance. They also provide flexibility to meet design challenges.

Each of these standing seam metal roof systems is designed to be installed over open framing. BattenLok® HS and SuperLok® must be installed on roof slopes of ½:12 or greater

The snap-together system, Ultra-Dek®, and field-seamed system, Double-Lok®, were designed from concept to completion for strength, durability and weatherability. The standing seams are three inches above the lowest part of the panel, well above the water level as it flows off the roof.

The rake/gable at both ends of each roof system finish with a 3-inch high standing seam, avoiding the necessity of finishing in the low, flat part of the panel where the greatest possibilities for leaks occur in many other systems.

Ultra-Dek® and Double-Lok® panels can be installed before or after the exterior walls are in place. All trim is attached after the roof is installed. With a recommended minimum slope of ¼:12, these standing seam metal roof systems can be used on all types of construction, including metal, masonry or wood, for either new construction or retrofit.